Inovance MD310 Series User Manual

Information on the dangers of high voltages and the need for qualified personnel.

Guidelines for safe installation, commissioning, and maintenance by trained personnel.

Precautions for wiring, power supply isolation, and handling stored charge.

Requirements for protective earthing and RCDs to prevent shock.

Details on identifying the MD310 AC Drive model and its nameplate information.

Technical specifications including dimensions, input/output voltage, current, and power.

Diagram illustrating the standard wiring connections for the AC drive.

Detailed list and description of main circuit and control circuit terminals.

Instructions for modifying EMC jumper settings to reduce leakage current.

Requirements for connecting the drive to different grid systems.

Understanding the operational logic and control sequences through a timing diagram.

A guided flowchart for the initial setup process of the AC drive.

Overview of the keypad layout, indicators, and LED display functions.

Detailed functions of each key and procedures for parameter setting via keypad.

Configuring essential motor parameters and control modes (SVC/V/F).

Setting frequency sources and command input modes.

Configuring motor start/stop behavior and acceleration/deceleration profiles.

Configuring digital input (DI) and output (DO) functions for control and monitoring.

Configuring startup frequency, S-curves, DC injection braking, and PI loop tuning.

List of common fault codes, their possible causes, and recommended solutions.

Guidance on diagnosing and resolving common operational symptoms and issues.

Basic drive settings, motor parameters, control modes (F0, F1, F2, F3).

Configuration of digital/analog inputs (F4), outputs (F5), and virtual I/O (A1).

Parameters for start/stop (F6), keypad (F7), faults (F9), and monitoring (U0).

Settings for auxiliary functions (F8), PID control (FA), optimization (A5, A6), communication (FD), and special features.