Need help?Do you have a question about the Inovance MD310 T11B and is the answer not in the manual?
General| Storage Temperature | -20°C to +60°C |
|---|---|
| Input Voltage | 3-phase 380V AC |
| Output Voltage | 0-380V AC |
| Control Mode | V/F control, vector control |
| Protection Features | Overcurrent, overvoltage, undervoltage, overload, short circuit, overheating |
| Communication Interface | RS485, Modbus |
| Operating Temperature | -10°C to +50°C |
| Humidity | 5% to 95% (non-condensing) |
| Altitude | Up to 1000 m without derating |
Precautions regarding severe electrical shock and lethal voltages when working with AC Drives.
Ensuring safe machine design, installation, and maintenance by trained personnel.
Risks associated with dynamic brake resistors and internal DC bus capacitors.
Ensuring protective earthing, RCD type B, and leakage current considerations.
Provides detailed technical specifications for MD310 AC Drive models.
Illustrates the standard wiring connections for a three-phase 380 VAC power supply.
Details the main circuit and control circuit terminals and their functions.
Setting motor parameters, control mode, and frequency references.
Lists common faults, their possible causes, and recommended solutions.
Troubleshooting specific fault codes (Err08-Err96) and their causes/solutions.
Guides for diagnosing common symptoms and their potential causes.
Parameters for configuring Motor 1, including type, power, voltage, and resistance.
Parameters related to start, stop, acceleration, and deceleration control.
Parameters for configuring motor overload, phase loss protection, and fault actions.
To Next Page