Inovance MD310 T11B - Get Familiar with Keypad; Indicators

3 Easy Setup
- 12 -
Step 1: Get Familiar With Keypad
Indicators
LED display
Confirm key
Shift key
Stop/Reset key
Programming key
RUN key
Decrement key
Increment key
Multi
-function key
■
Indicators
FWD/REV : It indicates forward or reverse rotation�
OFF indicates forward rotation and ON indicates reverse rotation�
TUNE/TC : ON indicates torque control mode, blinking slowly indicates auto-tuning state, blinking quickly indicates fault state�
REMOTE : It indicates whether the AC drive is operated by means of keypad, terminals or communication�
OFF indicates keypad control, ON indicates terminal control, and blinking indicates communication control�
RUN/ERR : It indicates the state of the AC drive�
OFF indicates the stop state, ON (green) indicates the running state, and ON (red) indicates the faulty state�
■
LED Display
The 5-digit LED display is able to display the frequency reference, output frequency, monitoring data and fault codes�