Need help?Do you have a question about the Inovance MD310 T7.5B and is the answer not in the manual?
General| Power | 7.5 kW |
|---|---|
| Control Mode | V/F control, sensorless vector control, closed-loop vector control |
| Frequency Range | 0.00 Hz to 400.00 Hz |
| Storage Temperature | -20°C to +60°C |
| Overload Capacity | 150% for 60 seconds |
| Protection Features | Overcurrent, overvoltage, undervoltage, overload, overheat |
| Communication Interface | RS485 |
| Ambient Temperature | -10°C to +40°C |
| Humidity | 5% to 95% (non-condensing) |
| Altitude | Up to 1000m |
| Input Voltage | 3-phase 380V (-15%) - 440V (+10%) |
| Power Supply Voltage | 3-phase 380V (-15%) - 440V (+10%) |
Guidelines and warnings for working with high voltage AC drives.
Ensuring safety during design, installation, and maintenance of the AC drive.
Precautions for safe electrical installation and servicing of the AC drive.
Details on protective earthing and RCD usage to prevent electrical shock.
Provides detailed technical specifications for various MD310 AC drive models.
Illustrates the standard wiring connections for a three-phase 380 VAC power supply.
Details the main circuit and control circuit terminals of the AC drive.
Setting motor parameters, control mode, and performing auto-tuning.
Lists common fault codes, their possible causes, and recommended solutions.
Detailed troubleshooting for faults like communication, motor tuning, and short circuits.
Diagnosing common issues like no display, HC display, or motor not rotating.
Configuration of motor overload protection, phase loss protection, and fault actions.
Parameters for PID control, including reference sources, gains, and limits.
To Next Page