Need help?Do you have a question about the Inovance MD310 T2.2B and is the answer not in the manual?
General| Rated Power | 2.2 kW |
|---|---|
| Control Mode | V/F control, Sensorless vector control (SVC) |
| Protection Features | Overcurrent, Overvoltage, Undervoltage, Overload, Short circuit |
| Communication Interface | Modbus RTU |
| Humidity | 5% to 95% (non-condensing) |
| Altitude | Below 1000m (derating above 1000m) |
| Operating Temperature | -10°C to +40°C (derating above 40°C) |
Guidelines for safe handling of high voltages and potential electrical hazards.
Requirements for design, installation, and maintenance by trained personnel.
Safety measures for wiring, isolation switches, and DC bus capacitor discharge.
Information on protective earthing, leakage current, and RCD types.
Table detailing electrical and physical specifications for various MD310 models.
Diagram illustrating the standard wiring connections for power and control circuits.
Detailed guide to the keypad layout, buttons, indicators, and LED display.
Configuration of motor parameters, control mode, tuning, and frequency reference.
Choosing the command source for the drive (keypad, terminal, or communication).
Settings for start/stop modes, acceleration/deceleration, and digital I/O functions.
Common causes and solutions for overcurrent and overvoltage faults during operation.
Diagnosis and solutions for various faults related to control power, undervoltage, overload, and motor tuning.
Troubleshooting for faults like user-defined faults, offload, PID feedback, and communication timeouts.
Diagnosing and resolving common operational symptoms like no display or abnormal rotation.
Configuration of various protection features, fault types, and auto-reset settings.
To Next Page