Inovance MD500T110G-INT - Page 75

5. Quick Setup
- 74 -
5
CONTINUE Para. Parameter name Default Commission
F4-00 DI1 function selection 1
33: External fault normally closed (NC) input
34: Frequency modication forbidden
35: PID action direction reverse
36: External STOP terminal 1
37: Command source switchover terminal 2
38: PID integral disabled
39: Switchover between main frequency source X and
preset frequency
40: Switchover between auxiliary frequency source Y and
preset frequency
41: Motor selection terminal 1
42: Motor selection terminal 2
43: PID parameter switchover
44: User-dened fault 1
45: User-dened fault 2
46: Speed control/Torque control switchover
47: Emergency stop
48: External STOP terminal 2
49: Deceleration DC injection braking
50: Clear the current running time
51–59: Reserved
Setting range:0 to 59;
F4-01 DI2 function selection 4
Setting range same as DI1.
F4-02 DI3 function selection 9
Setting range same as DI1.
F4-03 DI4 function selection 12
Setting range same as DI1.
F4-04 DI5 function selection 13
Setting range same as DI1;
F4-05 DI6 function selection 0
Setting range same as DI1;
F4-06 DI7 function selection 0
Setting range same as DI1;
F4-07 DI8 function selection 0
Setting range same as DI1
F4-08 DI9 function selection 0
Setting range same as DI1.
F4-09 DI10 function selection 0
Setting range same as DI1;
CONTINUE Para. Parameter name Default Commission