System Structure
‑22‑
3.2 Electrical Wiring Diagram
Figure 3‑2 Standard wiring
Note
● For details on S1 to S4 DIP switches, see "
Table 3–4 Description of control circuit
terminals
"
on page 27
.
● For three‑phase 380–480 VAC drives, a 0.4–75 kW model differs from a 90–450 kW
model in the wiring detail marked by the double arrows in the figure.
● For three‑phase 200–240 VAC drives, a 0.4–37 kW model differs from a 45–200 kW
model in the wiring detail marked by the double arrows in the figure.
To Next Page
Loading...
