Inovance MD520-4T2.2BS - Options; List of Options

Options
‑36‑
5 Options
5.1 List of Options
Optional peripherals include braking units, function expansion cards, and external
operating panels. For use of each option, see the corresponding user guide. If any
option is required, specify it in your order.
Table 5–1 List of options
Device Model Order No.
Supported Drive
Models
Description
Braking
components
External braking
unit [1]
MDBUN‑60‑T 1013133 All models 60 A 380 VAC series
MDBUN‑60‑5T 0101AR57 All models 60 A 480 VAC series
MDBUN‑90‑T 1013126 All models 90 A 380 VAC series
MDBUN‑90‑5T 0101AR58 All models 90 A 480 VAC series
MDBUN‑200‑T 1040104 All models 200 A 380 VAC series
MDBUN‑200‑5T 1040160 All models 200 A 480 VAC series
Built‑in braking
unit
Models containing
letter "B"
/ T1 to T8 (75 kW)
Three phase 380‑480 V
models. For T1 to T4
models, the built‑in
braking unit is
standard. For T5 to T8
(75 kW), the braking
unit is optional.
Expansion
cards
I/O expansion card
1
MD38IO1 1013098 T4 to T12
The following can be
added: five DIs, one
relay output terminal,
and one DO. Modbus
and CANlink are
supported
I/O expansion card
2
MD38IO2 1013103 All models
Three DIs can be
added.
I/O expansion card
3
MD38IO3 1040051 All models
The following can be
added: three DIs, one
RS‑485 communication
signal isolation input
terminal, and one
normally open relay
output terminal.
RS‑485
communication
card
MD38TX1 1013112 All models
Modbus
communication
adapter card with the
isolation feature