Inovance MD800 Series - Page 101

Commissioning and Trial Run
‑100‑
Parameter
No.
Communication
Address
Parameter Name Setting Range Default Unit Property
F9‑50 63794 Fault protection
action selection 3
Ones: EEPROM read‑write
fault
(E21)
0: Coast to stop
Tens: Motor auto‑tuning
result alarm (E22)
0: Coast to stop
Hundreds: Short circuit to
ground (E23)
0: Coast to stop
5: Cancel
Thousands: Reserved
5: Cancel
Ten thousands: Power
supply unit fault (E25)
2: Special action
5: Cancel
25000 ‑ Modifiable
only at stop
F9‑51 63795 Fault protection
action selection 4
Ones: Accumulative
running time reached
(E26)
0: Coast to stop
1: Decelerate to stop
4: Warning
5: Cancel
Tens: User‑defined fault 1
(E27)
0: Coast to stop
1: Decelerate to stop
4: Warning
5: Cancel
Hundreds: User‑defined
fault 2 (E28)
0: Coast to stop
1: Decelerate to stop
4: Warning
5: Cancel
Thousands: Accumulative
power‑on time reached
(E29)
0: Coast to stop
1: Decelerate to stop
4: Warning
5: Cancel
Ten thousands: Load loss
(E30)
0: Coast to stop
1: Decelerate to stop
4: Warning
5: Cancel
51111 ‑ Modifiable
only at stop