EasyManuals Logo

Inovance MD800 Series User Manual

Inovance MD800 Series
145 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
Unpacking and Transporting
‑11‑
If the equipment is damaged during transportation, its electrical safety can no longer be en‑
sured. Do not connect the equipment until a thorough high‑voltage test has been
performed.
1.2 Transportation Requirements
The product can be transported manually due to small size and light weight. Be
careful during transportation. Never throw the product, drag the product on the
ground, as well as step on the package and operate the product.
Cartons are used for transportation. Obey the product stacking limit (total stacking
height: 1.8 m) when packing and transporting the product.
1.3 Storage Requirements
Requirements for storage with package:
When the AC drive is placed near the wall and no passage is left, make sure a
distance of at least 200 mm between the AC drive and the wall.
Never occupy the fire exit and block the safety exit when storing the AC drive.
Reserve a passage of about 1 m wide in front of the fire hydrant, and do not place
the AC drive within one meter in front of the power distribution cabinet.
When the AC drive packed in a carton is stored outdoors, it must be placed on a
pallet and fully covered with rain‑proof cloth.
The AC drive that has been stored for more than 24 hours or underwent severe
weather must pass the risk assessment by relevant departments before
transshipment and delivery.
Store the AC drive with care. Never throw it, drag it on the ground, as well as step
on the package and operate it.
During storage, place the large and heavy AC drive at the bottom. The total
stacking height cannot exceed 1.8 m.
The AC drive delivered with the pallet must be placed within the pallet. When
there are more than two stacking layers and the overlapping stacking is used, fix
the AC drive with the stretch film (do not use the box‑sealing tape).
Requirements for storage without package:
The AC drive must be stored in a clean and dry room, with temperatures between
‑40℃ and +70℃ and temperature variations smaller than 1°C/min.

Other manuals for Inovance MD800 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Inovance MD800 Series and is the answer not in the manual?

Inovance MD800 Series Specifications

General IconGeneral
BrandInovance
ModelMD800 Series
CategoryDC Drives
LanguageEnglish

Related product manuals