Commissioning and Trial Run
‑84‑
Parameter
No.
Communication
Address
Parameter Name Setting Range Default Unit Property
F4‑40 62504 Corresponding
percentage of AI curve
3 minimum input
‑100.0% to +100.0% 0.0 % Modifiable
in any states
F4‑41 62505 AI curve 3 maximum
input
‑10.00 V to +10.00 V 10.00 V Modifiable
in any states
F4‑42 62506 Corresponding
percentage of AI curve
3 maximum input
‑100.0% to +100.0% 100.0 % Modifiable
in any states
F4‑48 62512 AI curve selection Ones:
1: Curve 1 (2 points)
2: Curve 2 (2 points)
3: Curve 3 (2 points)
4: Curve 4 (4 points)
5: Curve 5 (4 points)
Tens:
1: Curve 1 (2 points)
2: Curve 2 (2 points)
3: Curve 3 (2 points)
4: Curve 4 (4 points)
5: Curve 5 (4 points)
Hundreds:
1: Curve 1 (2 points)
2: Curve 2 (2 points)
3: Curve 3 (2 points)
4: Curve 4 (4 points)
5: Curve 5 (4 points)
321 ‑ Modifiable
in any states
F4‑49 62513 Setting for AI less than
minimum input
Ones:
0: Corresponding
percentage of min. input
1: 0.0%
Tens:
0: Corresponding
percentage of min. input
1: 0.0%
Hundreds:
0: Corresponding
percentage of min. input
1: 0.0%
0 ‑ Modifiable
in any states
To Next Page
Loading...
