- 104 -
4 Parameter Description
4
Parameter
No.
Parameter Name Setting Range Default Unit
Property
F6-44
Fire emergency function
selection
Bit3: Arrival gong output in
inspection or īære emergency state
Bit4: Multiple car calls registered
in īære emergency state
Bit5: Retentive at power failure in
īære emergency state
Bit6: Closing door by holding down
the door close button
Bit8: Door close at car call
registering
Bit9: Displaying hall calls in īære
emergency state
Bit10: Fireīæghter forced running
Bit11: Exiting īæreīæghter state upon
arrival at īære emergency īoor
Bit12: Not clearing car calls at
reverse door open in īæreīæghter
running state
Bit14: Opening door by holding
down the door open button
Bit15: Automatic door open at īære
emergency īoor
16456 -
ā