Inovance SV670P Series Maintenance Guide

Replacement of Parts
‑8‑
2.2 Removing the Motor Oil Seal
● Tools needed: a pair of needle‑nose pliers, a pair of slip‑proof gloves, and a piece
of cotton cloth.
● Disassembly procedure:
1. Put the cotton cloth onto the supporting point B to avoid the end cover from
being scratched during disassembly.
2. Secure the motor and use the needle‑nose pliers to hold point A of the oil seal
lip.
3. Pry the oil seal out gradually against the supporting point B.

Inovance SV670P Series Specifications

General

Brand	Inovance
Model	SV670P Series
Category	Servo Drives
Language	English