ISTRUZIONI PER L’UTENTE
INSTRUCTIONS FOR THE USER
ANLEITUNGEN FÜR DEN BENUTZER
Combination ovens with direct and boiler system, gas and electric models. Programmable panel
50
Message “LOSS OF GAS” alternated to “PRESS ENTER TO RESET” (fixed on the display)
Diagnosis Loss of supply gas
defect
No functioning
User Behaviour
Check that the on-off valves installed upwards are open.
Try to start the oven, after the third attempt, the oven will turn automatically to stand-by.
If the oven doesn’t light, call the technical service.
Remarks for
technical service
Check the presence of gas.
If it’s present, check the correct functioning of the flame control board.
To Next Page