12
3.4 Tare operation
Press “TARE” key, the gross weight is tared, indicator show the Net
weight, the “Net” “tared” status light is on. At tare mode, Press” TARE”
key, clear the tare weight, the indicator will show the gross weight.
3.5 Accumulation operation
At Zero mode, load weight till stable, Press go to accumulation
mode, ”Total” light on, display” n 001”, and then display loaded weight; unload
the weight , back to zero, load the second weight again till stable. Press
display”n002” then display the second loaded weight. Repeat it agin
and again, maximum 999 times.
Check the accumulation
Press “ON/OFF “key and hold it then press “TOTAL”” key, display ”n**”, (it is
the accumulating times) then show total weight. there are 8 digits totally. It
shows the first 4 digits then the last 4 digits. For example, the first 4 digits
is”0012”, the last 4 digits is”34,56” It means the actual weight is “1234.56”
EXIT the accumulation function
When the indicator show the last 4 digits, Press hold it, the
indicator show “ clr n”, it means don’t clear the total Weight, Press “PRINT”
key to exit it; if you want to clear total weight, Press “ZERO” or “TARE” key,
“clrn” change to “clry” it means clear total weight ,then Press “PRINT” to clear
the total weight and exit accumulating mode.
To Next Page
Loading...