27
ERR6 Exceed zero range Remove the load
6.2 Daily maintain
1. Protect the indicator from strong sunlight to prolong the using life
2. Good connection between load cell and indicator. Far from away
from strong electric field, magnetic field.
3. Power off the indicator when lightning
4. Power off the indicator firstly before plug and unplug
6.3 Restore default parameter
Enter to calibration, Set C07=1. Press” ” then press” ” to exit
saving setting. All parameter will back to default
Note ： Pls. do not restore default parameter easily if you are not
professional staff or not yet calibrate the scales.
Default parameter
Parameter instruction Default
C01
Calibration
1
C02
Decimal digits
0
C03
Resolution
1
C04
Max. capacity
10000
C05
Empty calibration
0
C06
Capacity calibration
0
C07
Restore default
0
C08
Warning tone
1
C09
Power-off automatically
0
C10
Power saving mode
0
To Next Page
Loading...