31
NS-24DD220NA16/NS-28DD220NA16/NS-32DD220NA16 24"/28"/32" 720p 60Hz, LED DVD combo TV
www.insigniaproducts.com
Digital audio (32-inch)
1 Make sure that your TV’s power adapter is unplugged and the digital speaker system or sound bar is turned off.
2 Connect a digital optical audio cable (not provided) to the DIGITAL OUTPUT (OPTICAL) jack on the side of your TV
and to the coaxial AUDIO IN jack on the digital speaker system or sound bar.
3 Plug your TV’s power adapter into a power outlet, then turn on your TV.
4 Turn on the digital speaker system or sound bar, then set it to the correct source. For more information, see the
documentation that came with the digital speaker system or sound bar.
5 On your TV’s Audio menu, highlight Digital Audio Format/Audio Delay, then press OK or
X. Set the Audio Format
option to PCM. See the Digital Audio Format/Audio Delay option in “Adjusting sound settings” on page 54.
Digital optical
audio cable
Digital speaker system
Side of TV
Digital optical
audio cable
connector
Digital optical
audio jack
On your TV
Sound bar
To Next Page
Loading...
