71
NS-24DD220NA16/NS-28DD220NA16/NS-32DD220NA16 24"/28"/32" 720p 60Hz, LED DVD combo TV
www.insigniaproducts.com
Learning more
You can learn more about remote control codes and
connecting a sound bar.
1 Press TV-MENU.
2 Press
W or X to highlight HELP, then press T or
OK.
3 Press
S or T to highlight Learn More, then press
OK or
X.
4 Press
S or T to highlight a topic, then press OK.
Your TV displays information about the topic you
selected.
5 Press TV-MENU to return to the previous menu, or
press EXIT to close the menu.
Updating the TV firmware
If your TV is behaving oddly and you have tried all the
solutions in the troubleshooting pages, you may need
to update the TV firmware.
1 On the Help menu, select System Info, then write
down your model, revision, and firmware
information. See “Viewing system information” on
page 70.
2 On a computer, go to www.insigniaproducts.com,
then click Support & Service. Enter
NS-24DD220NA16, NS-28DD220NA16, or
NS-32DD220NA16 in the box under Manual,
Firmware, Drivers & Product Information, then
click
X.
3 Follow the instructions in the Firmware Installation
Guide on the Insignia website to download the
firmware update and copy it to a USB flash drive.
4 Plug the USB flash drive into the USB port on the
side of your TV.
5 Press TV-MENU.
6 Press
W or X to highlight HELP, then press T or
OK.
7 Press
S or T to highlight Update Firmware, then
press OK or
X. A message asks if you want to
update the TV firmware.
8 Highlight OK, then press OK.
While your TV installs the firmware update, your
TV displays a status screen. Do not turn off your
TV until the update is complete.
Cautions
• Make sure that you have tried all other
solutions before you upgrade the
firmware.
• While the firmware is updating, do not
turn off your TV.
Note
To update the TV firmware, you need a:
• Computer with an available USB port
• High-speed Internet connection
•USB flash drive
To Next Page
Loading...
