EasyManua.ls Logo

Insignia NS-24DD220NA16 - Troubleshooting

Insignia NS-24DD220NA16
91 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
70
24"/28"/32" 720p 60Hz, LED DVD combo TV
www.insigniaproducts.com
Maintaining
Do not use your TV in areas that are too hot or too
cold, because the cabinet may warp or the screen
may malfunction. Your TV works best in
temperatures that are comfortable to you.
Storage temperatures are 32° to 122°F (0° to 50°C).
Working temperatures are 41° to 104°F (5° to 40°C).
Do not place your TV in direct sunlight or near a
heat source.
Cleaning the TV cabinet
Clean the cabinet with a soft, lint-free cloth. If the
cabinet is especially dirty, moisten a soft, lint-free
cloth in a weak detergent solution, squeeze the
excess moisture from the cloth, then wipe the cabinet
with the cloth. Use a clean cloth to dry the cabinet.
Cleaning the TV screen
Clean the screen with a soft, lint-free cloth.
Care and handling of discs
Handling discs
Do not touch the playback side of the disc. Hold the
disc by the edges so that fingerprints do not get on
the surface. Never stick paper or tape on the disc.
Storing discs
After playing, store the disc in its case. Do not expose
the disc to direct sunlight or sources of heat and never
leave it in a parked car exposed to direct sunlight.
Cleaning discs
Fingerprints and dust on the disc can cause poor
picture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc from
the center out.
Troubleshooting
Use the following troubleshooting information to
solve common problems.
Troubleshooting topics include:
Viewing system information
Learning more
Updating the TV firmware
Customizing TV settings
Restoring settings to the defaults
Video and audio problems
Remote control problems
General problems
Disc playback problems
INlink (CEC-compatible) device problems
Viewing system information
You may need to view system information during
troubleshooting.
1 Press TV-MENU.
2 Press
W or X to highlight HELP, then press T or
OK.
3 Press
S or T to highlight System Info, then press
OK or X.
4 If your TV uses open source code, press OK to
display the open source code information.
5 Press TV-MENU to return to the previous menu, or
press EXIT to close the menu.
Warning
Do not try to repair your TV yourself.
Contact authorized service personnel.

Table of Contents

Related product manuals