To Next PageTo Next Page
What to do if my Insignia TV DVD Combo says no signal?
If your Insignia TV/DVD combo displays a “No signal” error message, press the INPUT button to ensure you've selected the correct input for the device or service you're trying to use. If you're using a cable or satellite box, use its remote to change channels and make sure you've selected the correct input to view channels from that box.
Why is my Insignia TV DVD Combo remote not working?
If the remote control for your Insignia TV/DVD combo isn't working, ensure the power cord is correctly connected to both the TV/DVD combo and the power outlet. Remove any obstructions between the remote and the sensor on the front of the unit, and point the remote directly at the sensor. Also, make sure you've removed all plastic wrapping from the batteries, that the batteries are installed correctly, and replace them if necessary.
General| Screen Size | 29 inches |
|---|---|
| Resolution | 1366 x 768 |
| Display Technology | LED |
| DVD Player | Yes |
| HDMI Ports | 2 |
| USB Ports | 1 |
| Refresh Rate | 60 Hz |
| Display Type | LCD |
| HDMI Inputs | 2 |
| Built-in Tuner | ATSC/NTSC |
