How to fix no sound from one speaker on Insignia NS-32L120A13 LCD TV?
If there is no output from one of the speakers on your Insignia LCD TV, adjust the audio balance. Make sure that the audio cables are connected correctly and securely to your TV.
Why are there no channels after auto channel search on Insignia LCD TV?
If after performing an Auto Channel Search on your Insignia LCD TV there are no channels, make sure the antenna or cable/satellite TV is connected securely to your TV. Try replacing the cable between the antenna/cable or cable/satellite box and your TV. Reception can vary by channel depending on the broadcast power level of a given station.
How to improve poor picture quality on Insignia NS-32L120A13 LCD TV?
If your Insignia LCD TV has a poor picture, make sure that the room is not too bright because light reflecting off the screen can make the picture difficult to see. If an S-VHS camera or a camcorder is connected while another connected device is turned on, the picture may be poor, turn off one or more devices.
Why is picture quality different on some channels of Insignia NS-32L120A13 LCD TV?
If the picture quality is good on some channels but poor on others on your Insignia LCD TV, the problem may be a weak signal from the broadcaster or cable TV provider. If you connect to cable or satellite TV without a set-top box, you may need to install a set-top box to improve signal reception and picture quality. Contact your cable or satellite TV provider about upgrading to a set-top box.
Why won't my Insignia LCD TV turn on?
If your Insignia LCD TV is not turning on, ensure the power cord is correctly connected to both the TV and a working power outlet. If it is, unplug the power cord, wait 60 seconds, then plug it back in and try turning on the TV again. Other devices may be interfering with your TV. Try turning off one device at a time to determine which device is causing interference. After you have determined which device is causing interference, move it further from the TV to eliminate the interference.
What to do if Insignia NS-32L120A13 does not operate normally?
If your Insignia LCD TV does not operate normally by following the operating instructions, unplug it from the power outlet and refer servicing to qualified service personnel.
How to improve color on Insignia NS-32L120A13 LCD TV with good sound?
If your Insignia LCD TV has a good sound but poor color, adjust the contrast, color, and brightness settings of your TV.
How to stop audio noise on Insignia NS-32L120A13?
If you're experiencing audio noise with your Insignia LCD TV, it might be due to interference from other devices. Try turning off nearby devices one at a time—such as surround sound receivers, external speakers, fans, or hair dryers—to identify the source. Once identified, move the interfering device further away from the TV.
Why does my Insignia NS-32L120A13 only show snow?
If your Insignia LCD TV displays only snow (noise) on the screen, try these steps: * Try switching to another channel to rule out station issues. * Ensure the antenna or cable TV is securely connected. * If you're using an antenna, the digital channel signal may be low. Consult the manual on how to check the digital signal strength. * If the signal strength is low, adjust the antenna or consider using a directional outdoor antenna or a set-top antenna with a built-in amplifier.
Why does my Insignia NS-32L120A13 LCD TV have no color or a dark picture?
If your Insignia LCD TV shows no color, has a dark picture, or the color is incorrect, try the following: * Try another channel to see if the issue is with the broadcast. * Adjust the color settings in the TV menu. * Make sure the video cables are properly and securely connected. * Ensure the antenna or cable TV connection is secure. * If using an antenna, check the digital channel signal strength and adjust the antenna or use an amplified antenna if needed.
General| Screen Size | 32 inches |
|---|---|
| Display Type | LCD |
| Resolution | 1366 x 768 |
| Refresh Rate | 60 Hz |
| HDMI Ports | 2 |
| USB Ports | 1 |
| Aspect Ratio | 16:9 |
| Inputs | HDMI, USB, Composite |
Crucial guidelines for safe operation and product longevity.
Instructions for attaching the stand or wall mount to your TV.
Guidance on selecting the best video/audio connection type.
Steps to connect the TV to an electrical power source.
Instructions for connecting external video sources.
Steps to connect a DVD or Blu-ray player to the TV.
Steps to connect a computer to the TV for display.
How to modify visual settings for optimal TV display.
Steps to optimize the display when connected to a computer.
Procedure to set or modify the parental control access password.
How to configure rating limits for TV and movie content.
Solutions for common picture and sound issues.
To Next Page