Insignia NS-32L120A13

Other manuals for Insignia NS-32L120A13

Product Specifications2 pages

Información Importante8 pages

Information Importante8 pages

Important Information8 pages

Guide De L'Utilisateur74 pages

Quick Setup Guide2 pages

Questions and Answers:

A
Amber AguirreSep 1, 2025
Why is my Insignia NS-32L120A13 screen dark but the sound is good?
- O
  ocallahanSep 1, 2025
  If your Insignia LCD TV has a dark, poor, or no picture but the sound is good, here are some troubleshooting steps: * Try switching to another channel to rule out station-specific issues. * Ensure that the antenna or cable TV is securely connected. * Adjust the brightness settings. * Select the correct picture mode. * If using an antenna, check the digital channel signal strength. If it's low, adjust the antenna or use a directional antenna with an amplifier. * Make sure the video cables are securely connected. * Try using a new set of video cables, as the current ones may be faulty.
K
Karen JenkinsAug 31, 2025
Why does my Insignia NS-32L120A13 LCD TV have good picture but no sound?
- K
  Karina ParrishAug 31, 2025
  If your Insignia LCD TV has good picture but no sound, here's what you can check: * Increase the volume. * Make sure the TV isn't muted. * Disconnect any headphones, as they disable TV speakers. * Select the correct audio mode. * Ensure audio cables are securely connected. * Verify the antenna or cable TV connection is secure. * If using an antenna, check the digital channel signal strength. * Try a new set of audio cables in case the current ones are faulty.
C
Connie HuntAug 30, 2025
What to do if Insignia LCD TV power cord is damaged?
- A
  Amy VelazquezAug 30, 2025
  If the power supply cord or plug of your Insignia LCD TV is damaged or frayed, unplug the TV from the power outlet and refer servicing to qualified service personnel.
F
franciscosmithAug 29, 2025
What to do if Insignia LCD TV has been exposed to rain or water?
- J
  John MillerAug 29, 2025
  If your Insignia LCD TV has been exposed to rain or water, unplug it from the power outlet and refer servicing to qualified service personnel.
A
Anthony ThomasAug 28, 2025
What to do if liquid spilled into Insignia LCD TV?
- J
  Jessica MeyerAug 28, 2025
  If liquid has been spilled or objects have fallen into your Insignia LCD TV, unplug the TV from the power outlet and refer servicing to qualified service personnel.
C
Crystal WoodAug 27, 2025
What to do if Insignia LCD TV has been dropped or damaged?
- A
  Andrew RichardAug 27, 2025
  If your Insignia LCD TV has been dropped or damaged in any way, unplug it from the power outlet and refer servicing to qualified service personnel.
G
gdominguezAug 27, 2025
What to do if my Insignia NS-32L120A13 LCD TV exhibits a distinct change in performance?
- O
  Olivia MezaAug 27, 2025
  If your Insignia LCD TV exhibits a distinct change in performance, unplug it from the power outlet and refer servicing to qualified service personnel.
D
David HarrisAug 25, 2025
What to do if my Insignia LCD TV says 'No Signal'?
- R
  Ryan HunterAug 26, 2025
  If your Insignia LCD TV displays a 'No Signal' error message, try the following: * Press the INPUT button to select the correct input for your device or service. * If using a cable or satellite box, use its remote to change channels. * Ensure the correct input is selected for viewing channels from your cable or satellite box.
P
paulalittleAug 25, 2025
How to fix Insignia NS-32L120A13 LCD TV remote control not working?
- J
  Julie BuckleyAug 25, 2025
  If your Insignia LCD TV remote isn't working, try these steps: * Ensure the TV's power cord is properly connected to both the TV and a working power outlet. * Make sure there are no obstructions between the remote and the TV's sensor. * Point the remote directly at the sensor on the TV. * Remove any plastic wrapping from the batteries. * Verify the batteries are correctly installed. * Replace old batteries with new ones.