Insignia NS-40D420MX18 User Manual

26
NS-40D420NA18 / NS-40D420MX18 / NS-49D420NA18 / NS-55D420NA18 / NS-55D420MX18
www.insigniaproducts.com
Connecting a computer
1 Make sure that your TV’s power cord is unplugged and the computer is turned off.
2 Connect an HDMI cable (not provided) to an HDMI jack on your TV and to the HDMI OUT jack on the computer.
3 Plug your TV’s power cord into a power outlet, then turn on your TV and the computer.
4 Press INPUT to open the INPUT SOURCE list.
5 Press
 or  to highlight HDMI1, HDMI2, or HDMI3, then press ENTER.
6 Adjust the display properties on the computer, if necessary.
HDMI
cable
Side of TV
HDMI cable
connector
HDMI jack
On your TV
Computer
40"/49" model
Back of TV
55" model
HDMI jack

Insignia NS-40D420MX18 Specifications

General

Brand	Insignia
Model	NS-40D420MX18
Category	LED TV
Language	English