53
40" / 49" / 55" 1080p 60Hz LED TV
www.insigniaproducts.com
3 Press or to highlight Channel Labels, then
press ENTER or
.
4 Press
or to select the channel you want to
label, then press
to move to the channel label
field.
5 Press
or to select a character, then press or
to move to the previous or next character
position. Repeat this step to enter additional
characters. You can enter as many as 11 characters
(letters, numbers, or symbols).
6 When you have completed the label, press ENTER
or MENU to save your label and return to the
Channels menu.
7 Press EXIT to close the menu.
Checking the digital signal strength
You can check the digital signal strength to determine
if you need to adjust your antenna or digital cable
input. The higher the signal strength, the less likely
you are to experience picture degradation.
1 Press MENU.
2 Press
or to highlight CHANNELS, then press
or ENTER.
3 Press
or to highlight Channel Strength, then
press ENTER or
.
4 Press MENU to return to the previous menu, or
press EXIT to close the menu.
To Next Page
Loading...
Need help?
General