Insignia NS-46E440NA14 - Connecting an MHL-enabled device

22
Insignia 46" LED TV
www.insigniaproducts.com
Connecting an MHL-enabled device
You can connect an MHL-enabled device, such as a cell phone or Roku Streaming Stick™, and view your device’s
screen on your TV.
To connect an MHL-enabled device:
1 Connect the small connector on an MHL cable (not provided) to the micro USB port on the MHL-enabled device.
2 Connect the other end of the cable to the HDMI1/MHL jack on the side of your TV.
3 Turn on the MHL-enabled device.
4 If your TV is turned on, press ENTER when a message appears. Your MHL-enabled device’s menu opens.
OR
If your TV is turned off, turn on your TV. Press (home). Your MHL-enabled device’s menu opens.
Notes
You can also switch to MHL mode by:
• Pressing INPUT and selecting MHL/ACC
• Pressing MENU and selecting MHL/ACC
For instructions on using your MHL-enabled device, see “Using an
MHL-enabled device or Roku Streaming Stick” on page 62.
MHL cable
Side of TV
MHL-enabled
device
HDMI cable
connector
HDMI1/MHL
jack
On your TV