Insignia NS-46E440NA14 - Using HDMI (best)

27
NS-46E440NA14 Insignia 46" LED TV
www.insigniaproducts.com
Using HDMI (best)
To connect a computer using HDMI:
1 Make sure that your TV’s power cord is unplugged and the computer is turned off.
2 Connect an HDMI cable (not provided) to one of the HDMI jacks on the back or side of your TV and to the HDMI
OUT jack on the computer.
3 Plug your TV’s power cord into a power outlet, then turn on your TV and the computer.
4 Press INPUT to open the INPUT SOURCE list.
5 Press
S or T to highlight HDMI 1, HDMI 2, or HDMI 3, then press ENTER.
6 Adjust the display properties on the computer, if necessary.
HDMI cable
Back of TV
HDMI cable
connector
HDMI jack
On your TV