61
NS-46E440NA14 Insignia 46" LED TV
www.insigniaproducts.com
Turning Audio Receiver on or off
When INlink is turned on and you have connected
an audio receiver to your TV, turning on Audio
Receiver lets you use your TV’s remote control to
control the volume on the audio receiver.
To turn Audio Receiver on or off:
1 Press MENU. The on-screen menu opens.
2 Press
W or X to highlight SETTINGS, then press
T or ENTER. The SETTINGS menu opens.
3 Press
S or T to highlight INlink, then press
ENTER. The SETTINGS · INlink menu opens.
4 Press
S or T to highlight Audio Receiver, then
press ENTER.
5 Press
S or T to highlight On (your TV’s remote
control controls the connected audio receiver’s
volume) or Off (your TV’s remote control does
not control the connected audio receiver’s
volume), then press ENTER.
6 Press MENU to return to the previous menu, or
press EXIT to close the menu.
Displaying a list of INlink-compatible
(HDMI CEC) devices
You can display a list of HDMI CEC devices that are
connected to your TV.
To display a list of INlink-compatible (HDMI CEC)
devices:
1 Press MENU. The on-screen menu opens.
2 Press
W or X to highlight SETTINGS, then press
T or ENTER. The SETTINGS menu opens.
3 Press
S or T to highlight INlink, then press
ENTER. The SETTINGS · INlink menu opens.
4 Press
S or T to highlight INlink Device Lists or
Connect, then press ENTER. A list of the HDMI
CEC-compatible devices you have connected
appears.
5 Press MENU to return to the previous menu, or
press EXIT to close the menu.
To Next Page
Loading...
