Insignia NS-46E440NA14 - Switching to an MHL-device

63
NS-46E440NA14 Insignia 46" LED TV
www.insigniaproducts.com
To switch to an MHL-device that is already
connected:
1 Press INPUT, then press
S or T to select
HDMI 1-MHL/ACC.
OR
Press MENU, then press
W or X to highlight
MHL.
2 Press ENTER to access your MHL-enabled
device. Your device’s menu opens.
3 Use
S T W X and ENTER to navigate on your
device.
Note
Your device’s menu will vary depending on
the device and the apps you have loaded
on the device.
Notes
• The buttons you use to navigate on
your device may vary depending on
the device.
• You can also press to select a
connected MHL-enabled device.