13
1.6 Cu. Ft. 12 Volt Compact Refrigerator
www.insigniaproducts.com
Setting the thermostat
1 The first time you turn your refrigerator on, adjust the thermostat to 7 and let
your refrigerator cool at least 2 hours before putting foods inside.This makes
sure that the cabinet is thoroughly chilled before food is put in.
2 After it is fully cooled, test the temperature and adjust towards 1 to make it
less cool or towards 7 to make it cooler, as needed. The 4 setting should be
appropriate for home or office refrigerator use.
3 To turn off your refrigerator, set the thermostat to 0.
Note: Your refrigerator’s temperature ranges from 32° to 46.4° F (0° to 8° C).
Notes:
• Turning the thermostat to 0 stops the cooling cycle but doesn’t shut off the power
to your refrigerator.
• If your refrigerator is unplugged or loses power, you must wait three to five
minutes before restarting it. If you try restart before this time delay, your
refrigerator won’t start.
• Large amounts of food lower the cooling efficiency of your refrigerator.
• When changing the thermostat setting, adjust it one increment at a time. Wait
several hours for temperature to stabilize between adjustments.
To Next Page
Loading...
