Insignia NS-FCBN3 User Manual

12
www.insigniaproducts.com
3 Insert four wooden dowels (A) into the edges of the left side panel (2), then use a Phillips screwdriver to attach
three long KD bolts (D) to the holes indicated below. Don’t overtighten.
4 Insert four wooden dowels (A) into the edges of the right side panel (3), then use a Phillips screwdriver to attach
three long KD bolts (D) to the holes indicated below. Don’t overtighten.

Insignia NS-FCBN3 Specifications

General

Brand	Insignia
Model	NS-FCBN3
Category	Indoor Furnishing
Language	English