Insignia NS-FCBN3 - Cabinet Top and Back Panel

16
www.insigniaproducts.com
STEP 5: Preparing the cabinet top
You n e ed:
1 Use a Phillips screwdriver to attach two long KD bolts (D) into the outside holes in the cabinet top (1). Don’t
overtighten.
2 Use a Phillips screwdriver to attach a connection bar (18) to each side of the top (1) with four 4 x 22 screws (V).
D KD Bolt (long) (2)
Phillips screwdriver
1 Cabinet top
V 4 x 22 mm screws (8)
18 Connection bar (2)