Insignia NS-FCBN3 - STEP 3: Assembling the Cabinet Side Panels

13
2-Drawer File Cabinet - Dark Oak
www.insigniaproducts.com
STEP 3: Assembling the cabinet side panels
You n e ed:
1 Insert three large KD cams (E) into the left side panel (2). Make sure that the cam lock arrows are pointing toward
their corresponding cam-lock screw holes.
2 Align the wooden dowels on the left side panel and KD bolts on the left front vertical trim piece with the holes in
the corresponding piece, then push the two pieces together. Make sure that the edges of the panels are flush with
each other, then tighten the KD cams.
E KD Cam (large) (6)
Phillips screwdriver
2 Left side panel
3 Right side panel
15 Left front vertical trim
16 Right front vertical trim
Left side panel
Large KD cam
Arrow