Insignia NS-FCBN3 User Manual

11
2-Drawer File Cabinet - Dark Oak
www.insigniaproducts.com
STEP 2: Preparing the cabinet front and sides
You n e ed:
1 Use a Phillips screwdriver to attach three long KD bolts (D) into alternate holes in the left (15) and right (16) front
vertical trim pieces. Don’t overtighten.
2 Attach one long KD bolt (D) on the left side of the left front vertical trim (15) and one long KD bolt (D) on the right
side of the right front vertical trim (16).
A 7.8 × 30 mm
wooden dowels (8)
D KD Bolt (long) (14)
Phillips screwdriver
2 Left side panel
3 Right side panel
15 Left front vertical trim
16 Right front vertical trim

Insignia NS-FCBN3 Specifications

General

Brand	Insignia
Model	NS-FCBN3
Category	Indoor Furnishing
Language	English