26
www.insigniaproducts.com
STEP 12: Installing the drawer faces
You n e ed:
1 Insert two small KD cams (G) into the bottoms of both drawer bottom support bars (14), then align the drawer face
with the drawer assembly and push the parts together.
2 Attach the drawer face (9) to the drawer assembly with four M6 × 12 mm bolts (K) through the plastic drawer face
brackets, then tighten the KD cams on the bottoms of the drawer bottom support bars.
3 Repeat for the other drawer.
G KD Cam (small) (4)
Phillips screwdriver
K M6 × 12 mm bolt (8)
9 Drawer front (2)
G
K
To Next Page
Loading...
