18
www.insigniaproducts.com
Mounting your soundbar on a wall (optional)
You need (not included with your soundbar):
Included with your soundbar:
1 Select a location close to your TV and directly in front of the viewing/listening
position. For best sound quality, choose a location where sound waves are not
blocked by furniture or other obstacles.
2 If you are mounting your soundbar to drywall, use the stud finder to find the
studs and mark the locations.
3 Drill two 15/64” holes into the wall 11.4" (29 cm) apart and make sure that they
are level.
4 If you are mounting on drywall without studs or on concrete, install wall
anchors (included) into the holes you drilled.
Note: Make all connections to your soundbar before mounting your soundbar
on a wall.
Level
Stud finder
(optional for wood stud
installation)
Drill and drill bit
Hammer
Screwdriver
Tape measure
Tape
Screw (2)
Wall anchor (2)
Mounting holders (2)
To Next Page
Loading...
