20
www.insigniaproducts.com
Using your soundbar
This system lets you access five different sound sources, including HDMI (ARC),
Optical, AUX IN, Bluetooth, and USB.
Listening to your soundbar
1 Press to turn on your soundbar. The source indicator turns from red to the
color of the selected sound source (green=optical, blue=Bluetooth,
orange=AUX IN, purple=USB, or white=HDMI (ARC).
2 Turn on the audio source device connected to your soundbar and begin
playback.
3 Press on your soundbar or SOURCE on your remote control repeatedly
until you hear sound from your soundbar.
4 Adjust the volume on your soundbar or the source audio device to a
comfortable level.
5 Press again to turn off your soundbar. The status indicator lights red.
Receiving a phone call while playing music
• When you receive a call while playing music through your phone, the music
stops automatically.
• When you hang up, depending on the setting of your phone, the current track
may resume playback.
Cleaning your soundbar
Notes:
• If you use the HDMI (ARC) or OPTICAL jack, you must change your device’s
audio output setting to the PCM format. See the documentation that came
with the output device for additional information.
• Make sure that your sound source is set to output sound to your soundbar
(whichever connection method you choose). See the documentation that
came with the device for additional information.
WARNING: Continuous use of high volume sound may permanently damage
your hearing.
CAUTION: Only use a soft and clean rag to clean the outside of your soundbar.
Never clean it with chemicals, detergents, or abrasives.
To Next Page
Loading...
