28
3-in-1 TV STAND
www.insigniaproducts.com
Step 3: Attach the mounting frame to the swivel bracket
1 Hold the flat side of the mounting frame (N) against the swivel bracket (M), aligning the holes. Make sure that
the two recessed holes on mounting frame (N) are at the bottom.
2 Insert a 1/2" bolt (S), with a lock washer (W) and a flat washer (X), through the hole in the swivel bracket (M),
then screw it into the threaded hole on the mounting frame (N).
3 Repeat this for the three remaining holes joining the swiveling bracket (M) to the mounting frame (N).
4 Securely tighten with the 4 mm hex key (EE).
You’ll need:
NS-HWMC1848_17-0157_MAN_V4_ENG.fm Page 28 Tuesday, March 7, 2017 3:08 PM
To Next Page
Loading...
