Insignia NS-LDVD32Q-10A - 32" LCD TV - Installing the Stand or Wall-Mount Bracket; Installing the Stand (NS-LDVD26 Q-10 A); Installing the Stand (NS-LDVD32 Q-10 A)

4
www.insigniaproducts.com
Installing the stand or a
wall-mount bracket
Installing the stand (NS-LDVD26Q-10A)
If you plan to use your TV/DVD combo in an upright
position on a flat surface, you need to install the
stand.
To install the stand (NS-LDVD26Q-10A):
1 Place a towel or cushion on a flat surface, then
lay your TV/DVD combo face-down on the towel
or cushion.
2 Slide the stand into the slot on the bottom your
your TV/DVD combo.
3 Secure the stand with the eight provided
screws.
4 Place your TV/DVD combo in an upright
position on a flat surface.
Installing the stand (NS-LDVD32Q-10A)
If you plan to use your TV/DVD combo in an upright
position on a flat surface, you need to install the
stand.
To install the stand (NS-LDVD32Q-10A):
1 Place a towel or cushion on a flat surface, then
lay your TV/DVD combo face-down on the towel
or cushion.
2 Slide the stand into the slot on the bottom your
your TV/DVD combo.