Insignia NS-LDVD32Q-10A - 32" LCD TV - Channel Equalizer; Setting Up DVD 3 D Sound

41
www.insigniaproducts.com
3 Press or to highlight CHANNEL
EQUALIZER, then press OK/ENTER. The
CHANNEL EQUALIZER PAGE opens.
4 Press or to highlight EQ TYPE, then press
OK/ENTER.
5 Press or to highlight an equalizer pattern,
then press OK/ENTER. You can select:
•NONE
•ROCK
•POP
•LIVE
•DANCE
•TECHNO
• CLASSIC
•SOFT
6 Press one or more times to go back to the
previous menu.
7 To close the menu, press to highlight the
icon, then press OK/ENTER.
Setting up DVD 3D sound
To set up DVD 3D sound:
1 While your TV/DVD combo is in DVD mode,
press SETUP. The icon is highlighted.
2 Press or to highlight (audio), then press
OK/ENTER. The AUDIO SETUP PAGE opens.
3 Press or to highlight 3D PROCESSING, then
press OK/ENTER. The 3D PROCESSING PAGE
opens.
4 Press or to highlight a setting, then press
OK/ENTER. You can select:
• V SURR—Turns virtual surround sound on or
off.
• REVERB MODE—Selects a reverb mode.
5 Press or to adjust the setting, then press
OK/ENTER.
6 Press one or more times to go back to the
previous menu.
7 To close the menu, press to highlight the
icon, then press OK/ENTER.
-- GENERAL SETUP PAGE --
LAST MEMORY
TV DISPLAY
CAPTIONS
SCREEN SAVER
TV OUTPUT
GOTO GENERAL SETUP PAGE
OFF
ON
YPbPr
OFF
WIDE
-- AUDIO SETUP PAGE --
SPEAKER SETUP
DOLBY DIGITAL SETUP
CHANNEL EQUALIZER
3D PROCESSING
GOTO AUDIO SETUP PAGE