10
NS-MC60SS8
www.insigniaproducts.com
8 Turn the exhaust valve handle to the Sealing icon, indicating that the
multi-cooker is in airtight condition.
9 Plug in the multi-cooker.
10 After each use, remove any foreign objects or materials from the
rubber gasket and anti-block shield. Keep these items clean to avoid
odor.
Opening the cover safely
1 Unplug the multi-cooker.
2 Make sure that the pressure is released.
• For solid foods:
You can either turn the exhaust valve to the “Venting” position
until the float valve falls or put a wet towel on the cover to quicken
cooling until the float valve falls.
Notes
• To manually exhaust the multi-cooker, turn the exhaust
valve to the Venting icon.
• Make sure that the float valve has fallen.
Cautions
• Never pull the rubber gasket. Pulling the gasket may
deform it, affecting the sealing and pressure of your cooker.
• Never use your multi-cooker with a damaged gasket. If your
cooker has a damaged gasket, it should be sent to the
service center for replacement.
Cautions
• Do not open the lid before the pressure in the pot has been
completely released.
• Do not force the lid if it is difficult to open.
• Do not pull out the exhaust valve when turning it.
• After cooking a large amount of food, do not immediately
open the vent. Allow it to cool for a short while before
opening the lid.
Sealed position
Venting position
NS-MC60SS8_17-0691_MAN_V1_ENG.fm Page 10 Tuesday, September 12, 2017 11:32 AM
To Next Page
Loading...
