11
6-Quart Multi-Cooker
www.insigniaproducts.com
•For liquids:
Let the multi-cooker cool naturally, until the float valve falls on its
own.
3 Open the cover by holding the cover handle with one hand, then
rotating the cover until the cover marking aligns with the “Open”
mark on the housing, then lift and open the cover.
Cooking - general
After the initial preparations are complete and the multi-cooker is closed
and ready, do the following:
1 Turn on the multi-cooker by plugging it in. The display blinks and
shows a red horizontal line “---”, indicating that the multi-cooker is
ready.
2 Press the desired preset button. The indicator next to the preset
button turns red and 10 seconds later cooking begins. The display
shows a bright red horizontal line “---”.
3 After the selected cooking cycle is completed your cooker
automatically enters the Keep Warm state, the selected function
indicator goes out, and the Keep Warm indicator turns on. At this time
the display screen shows “0.0”, and the cooker beeps 10 times.
Note
When cooking a small quantity of food, the inner pot may stick
to the cover when it is opened. In this case, shake the inner pot
manually, then remove the cover after the inner pot falls into the
cooker body.
Notes
• If the buttons do not function, make sure that the lid is
closed correctly.
• Cooking time varies with different preset selections. The
greater the food amount, the longer the cooking time.
• You can cancel the current preset selection and return to
standby by pressing the Cancel button.
• Within 10 seconds you can re-select preset time and
function level. The electric multi-cooker starts working
within 10 seconds after selection.
• While cooking, the cooker may sometimes generate a
“cluck” sound. This is not a malfunction.
NS-MC60SS8_17-0691_MAN_V1_ENG.fm Page 11 Tuesday, September 12, 2017 11:32 AM
To Next Page
Loading...
