EasyManua.ls Logo

Insignia NS-RFD26SS9 - Water Filter Replacement; Removing the Old Water Filter

Insignia NS-RFD26SS9
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
www.insigniaproducts.com
28
26.6 Cu. Ft. French Door Refrigerator
To drink the freshest and cleanest water from your refrigerator, change the filter on time.
1 Shut off the water supply, then turn off the water shutoff valve on your refrigerator.
2 Turn the old water filter about 1/4 turn counter-clockwise, then pull out the filter.
3 Pull the water filter out of the filter holder. Depending on water impurities, you may have to pull hard to remove the
filter.
Note: When you pull out the water filter, a little water may leak from the opening which is normal. To minimize the water leakage,
keep the filter horizontal when you pull it out.
Water filter
Filter holder
NS-RFD26SS9_18-0333_MAN_V3_EN.fm Page 28 Tuesday, June 12, 2018 9:16 AM

Related product manuals