Insignia Roku TV NS-32DR420CA16 - AV (Composite Video) (Good)

21
NS-32DR420CA16/ NS-55DR420CA16
www.insigniaproducts.com
AV (composite video) (good)
1 Make sure that your Insignia Roku TV’s power cord is unplugged and the DVD or Blu-ray player is turned off.
2 Connect an AV cable (not provided) to the VIDEO jack and L and R (audio) jacks on the back of your Insignia Roku TV
and to the AV OUT jacks on the DVD or Blu-ray player.
3 Plug your Insignia Roku TV’s power cord into a power outlet, then turn on your Insignia Roku TV and DVD or Blu-ray
player.
4 On the Home screen, press or to highlight the AV tile, then press OK.
Note
Cables are often color-coded to match color-coded jacks.
Note
When you connect the audio using the L and R (audio) jacks, the audio
output is analog.
AV cable
Back of TV
AV cable
connector
AV jack
Audio cable
connectors
Analog
audio jacks
DVD or Blu-ray
player
On your TV