Insignia Roku TV NS-32DR420CA16 - Connecting External Sources; Connecting a Computer via HDMI

24
32"/55" 1080p, 60Hz, LED Insignia Roku TV
www.insigniaproducts.com
Connecting a computer
You can use an HDMI jack on your Insignia Roku TV to connect to a computer.
1 Make sure that your Insignia Roku TV’s power cord is unplugged and the computer is turned off.
2 Connect an HDMI cable (not provided) to an HDMI jack on the side or back of your Insignia Roku TV and to the
HDMI OUT jack on the computer.
3 Plug your Insignia Roku TV’s power cord into a power outlet, then turn on your Insignia Roku TV and the computer.
4 On the Home screen, press or to highlight the HDMI 1, HDMI 2, or HDMI 3 tile, then press OK.
5 Adjust the display properties on the computer, if necessary.
HDMI cable
Back of TV
HDMI cable
connector
HDMI jack
On your TV