27
NS-32DR420CA16/ NS-55DR420CA16
www.insigniaproducts.com
Connecting external speakers or a sound bar
When you connect external speakers or a sound bar, sound plays through your Insignia Roku TV speakers and the
external speakers or sound bar.
You can connect external speakers or a sound bar using:
• Digital audio using the SPDIF jack
• Digital audio using the HDMI 1/ARC jack
•Analog audio
Digital audio using the SPDIF jack
1 Make sure that your Insignia Roku TV’s power cord is unplugged and the digital speaker system or sound bar is
turned off.
2 Connect a digital optical audio cable (not provided) to the SPDIF jack on the side of your Insignia Roku TV and to the
digital optical AUDIO IN jack on the digital speaker system or sound bar.
3 Plug your Insignia Roku TV’s power cord into a power outlet, then turn on your Insignia Roku TV.
4 Turn on the digital speaker system or sound bar, then set it to the correct source. For more information, see the
documentation that came with the digital speaker system or sound bar.
5 To turn off your Insignia Roku TV speakers, on the Home menu, press or to highlight Settings, then press OK.
Highlight Audio, then press OK. Highlight TV speakers, then press OK. Press OK to remove the check from the TV
speakers enabled check box.
Digital optical
audio cable
Digital speaker system
Side of TV
Digital optical
audio cable
connector
Digital optical
audio jack
On your TV
Sound bar
To Next Page
Loading...
