28
32"/55" 1080p, 60Hz, LED Insignia Roku TV
www.insigniaproducts.com
Digital audio using the HDMI 1/ARC jack
Your Insignia Roku TV can send sound to an ARC device, like an AV receiver, to create a home theater that uses two or
more speakers.
When you connect external speakers or a sound bar, sound plays through your Insignia Roku TV speakers and the
external speakers or sound bar.
1 Make sure that your Insignia Roku TV’s power cord is unplugged and the digital speaker system or sound bar is
turned off.
2 Connect an HDMI cable (not provided) to the HDMI 1/ARC jack on the back of your Insignia Roku TV and to the
HDMI IN jack on the digital speaker system or sound bar.
3 Plug your Insignia Roku TV’s power cord into a power outlet, then turn on your Insignia Roku TV.
4 Turn on the digital speaker system or sound bar, then set it to the correct source. For more information, see the
documentation that came with the digital speaker system or sound bar.
5 To turn off your Insignia Roku TV speakers, on the Home menu, press or to highlight Settings, then press OK.
Highlight Audio, then press OK. Highlight TV speakers, then press OK. Press OK to remove the check from the TV
speakers enabled check box.
6 To configure the HDMI 1/ARC jack to output sound to an ARC device, on the Home menu, press or to highlight
Settings, then press OK. Highlight System, then press OK. Highlight Control other devices (CEC), then press OK.
Highlight HDMI ARC, then press OK to check the box.
On your TV
ARC audio device
Sound bar
HDMI cable
connector
HDMI 1/ARC
jack
Back of TV
To Next Page
Loading...
