29
NS-32DR420CA16/ NS-55DR420CA16
www.insigniaproducts.com
Analog audio
When you connect an analog system or sound bar to the jack, your Insignia Roku TV speakers are muted.
1 Make sure that your Insignia Roku TV’s power cord is unplugged and the analog speaker system or sound bar is
turned off.
2 Connect an audio cable (not provided) to the jack on the side of your Insignia Roku TV and to the AUDIO IN jacks
on the analog speaker system or sound bar.
3 Plug your Insignia Roku TV’s power cord into a power outlet, then turn on your Insignia Roku TV.
4 Turn on the analog speaker system or sound bar, then set it to the correct source. For more information, see the
documentation that came with the analog speaker system or sound bar.
Audio cable
Analog speaker system
Side of TV
Audio cable
connector
jack
On your TV
Sound bar
To Next Page
Loading...
