Inspired Flight IF1200A - Page 94

IF1200A Pilot Operating Handbook Appendix
Connect HereLink and QGroundControl through a WiFi Network
Step
Action
15
The Create New Link Configuration dialog box closes, and the new Comm Link
name that you created (IF1200A) appears at the top of the screen.
16
To connect the GCS to the HereLink, select the new Comm Link to the HereLink
(IF1200A), at the top of the screen, then click on Connect at the bottom of the
screen.
17
Once the aircraft and HereLink are wirelessly connected, the GCS begins issuing
audible signals. This may take a few moments.
End of Procedure
IFT Doc Num 102094, Rev 1.02 Page 91