Inspur NF5486M5 - User Manual

Inspur Server User Manual
NF5486M5

Summary

Abstract

Warnings

1 Safety Instructions

2 Product Specification

2.1 Introduction

Overview of the Inspur NF5486M5 server and its capabilities.

2.2 Features and Specifications

Detailed technical specifications and key features of the server hardware.

3 Component Identification

3.1 Front Panel Components

Identifies and describes front panel buttons, LEDs, and connectors.

3.2 Rear Panel

Identifies and describes rear panel ports and components.

3.3 Motherboard Components

Details components and connectors on the server's motherboard.

4 Operations

4.1 Power up the Server

Step-by-step instructions for powering on the server.

4.2 Power down the Server

Procedures for safely shutting down and powering off the server.

4.3 Extend the Server from the Rack

Guidance on safely extending the server chassis out of the rack.

5 Setup

5.1 Optimum Environment

Guidelines for selecting an optimal environment for server installation.

5.4 Installing the Server into the Rack

Detailed steps for securely installing the server into a rack.

5.5 Installing the Operating System

Instructions on how to install a supported operating system on the server.

6 Hardware Options Installation

6.2 Processor Option

Procedures and precautions for installing or replacing the server's processor.

6.3 Memory Option

Guidelines and methods for installing server memory modules (DIMMs).

6.4 Hot-plug HDD Option

Instructions for installing or removing hot-plug Hard Disk Drives (HDDs).

7 BIOS Setup

7.1 Common Operations

Covers basic operations and navigation within the BIOS setup interface.

7.2 BIOS Parameter Description

Explains various BIOS parameters and their settings for system configuration.

7.3 Firmware Update

Instructions for updating the server's BIOS firmware.

8 BMC Settings

8.1 Introduction

Introduces the specifications and main functions of the server management software.

8.3 Web Interface Introduction

Guide to logging into and navigating the web-based management interface.

8.6 Power and Fan

Monitoring and control of server power supply, fan speed, and power consumption.

8.9 Fault Diagnosis

Tools and interfaces for diagnosing server faults and system issues.

9 Common Faults, Diagnosis and Troubleshooting

9.1 Hardware Problems

Troubleshooting common hardware issues like power failure, no display, and LED errors.

9.2 Software Problems

Solutions for software-related issues such as OS installation and network problems.

10 Battery Replacement

11 Regulatory Compliance Notices

11.2 Federal Communications Commission Notice

FCC compliance statements and RF emission limits for devices.

11.3 European Union Regulatory Notice

CE marking compliance with EU directives for product safety and EMC.

12 Electrostatic Discharge

12.2 Grounding Methods to Prevent Electrostatic Discharge

Methods and tools for proper grounding to protect against ESD.

13 Warranty

13.2 Warranty Service

Details on obtaining remote services and RMA procedures.

13.3 Warranty Exclusions

Conditions and causes that are excluded from the standard warranty coverage.

Inspur NF5486M5 Specifications

General

Brand	Inspur
Model	NF5486M5
Category	Server
Language	English