Insta360 Ace Pro 2 User Manual
Connect to the Insta360 app
1. Press the Power Button to turn on the camera.
2. Enable Wi-Fi and Bluetooth on your smartphone.
3. Open the Insta360 app and tap the camera icon at the bottom of the page. Follow the on-screen
instructions to activate your camera.
4. If you connect to the Insta360 app for the first time, you need to authorize the connection on the
touchscreen or press the Shutter Button.
If you are unable to connect to the app, go to your smartphone's Wi-Fi settings, find your camera,
enter the password and return to the app. You can change the camera's Wi-Fi password on the app
settings page.
Still can't connect to the Insta360 app?
1. Check if the Insta360 app has permission for the following: network permission, Bluetooth
permission, or local network permission.
2. Check if Wi-Fi is enabled on your camera.
3. Make sure the camera is close enough to the phone.
To Next Page
Loading...
